CHAPTER ONE
1.0 INTRODUCTION
The industrial batch counter is an electronic and electrical device that handles the counting and controls the flow of individuals using an automated slide door that allows access only when the administrator permits. The technique involved in the design is a simple sensor unit that opens and closes the door when someone obstructs the light path. These parameters can be used to determine when someone has moved in or out of the conference hall (for instance). The light sensing type involves monitoring the unit with photon or optical devices; this consists of the encoder (transmission path or the source of energy) and the decoder (receiver unit that converts the light intensity to electrical signal). An LED emitter, combined with a photo detector (Light Dependent Resistor, photo transistor or infrared sensing diode) in proximity, form a very useful object called opto-coupler or opto-isolator. When the opto coupler is obstructed, the door opens and the display shows an increase or decrease of individuals in the room (depending on the path followed). This project report creates a greater picture of the industrial batch counter.
1.2 JUSTIFICATION OF THE PROJECT
The need for counting the number of persons inside the conference hall is for statistical record, which will help the conference hall management take a proper account of people; and as well, control the conference hall capacity from being over populated.
1.3 THE SCOPE OF THE PROJECT
This project covers the features of the capacity monitor, the hardware description, the use of transistor-transistor logic and microcontroller, how the system works and its applications.
1.4 THE PROJECT REPORT ORGANIZATION
This project report is organized into five chapters. The first chapter covers the introduction, aim scope and justification of the project. The second chapter talks about the technology behind the project, the description of the microcontroller, as well as the working principle of the project. Chapter three covers the methodology of the project. Chapter four discusses the designing and construction of the project, as well as other components used in designing this project. Chapter four also talks about the testing of the individual components and packaging of the project. And lastly, chapter five summarizes and concludes the project.
Can't find what you are looking for?
Call (+234) 07030248044.
OTHER SIMILAR ELECTRICAL ENGINEERING PROJECTS AND MATERIALS
CONSTRUCTION OF A LIGHT SENSITIVE ALARM
CHAPTER ONE INTRODUCTION The light sensitive alarm is an electronic circuit that detects a sudden shadow falling on the light sensor and sounds the bleeper. When this happens, the circuit will respo...Continue reading »
CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
ABSTRACT This write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and physical realization of the construction of the pro...Continue reading »
DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
ABSTRACT The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted ...Continue reading »
DESIGN OF AN AUTOMATIC BATTERY CHARGER
CHAPTER ONE Introduction While most modern electrical appliances receive their power directly from the utility grid, a growing number of everyday devices require electrical power from batteries in o...Continue reading »
FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It al...Continue reading »
INVESTIGATION OF THE PERFORMANCE INDEX OF 3.5KVA/48V POWER INVERTER
ABSTRACT The initial cost of the power inverter system is significant higher compared to the conventional source of power. As a result, there is need for the performance evaluation of various power i...Continue reading »
What are looking for today?
Format: | Ms Word | ||
Chapters: | 1 - 5 | ||
Pages: | 34 | ||
Attributes: | Appendix | ||
Price: | ₦5000 | ||
Get the complete project » |
THE IMPACT OF HUMAN RESOURCE PLANNING ON ORGANIZATIONAL PERFORMANCE
97,280 people found this useful
IMPACT OF E-LEARNING ON THE ACADEMIC PERFORMANCE OF UNDERGRADUATE STUDENTS (A CASE STUDY OF NATIONAL...
74,450 people found this useful
TAX ADMINISTRATION IN NIGERIA: CHALLENGES AND PROSPECTS, A CASE STUDY OF LAGOS STATE BOARD OF INTERN...
69,379 people found this useful
IMPACT OF SOCIAL MEDIA ON CONSUMER BEHAVIOR
66,345 people found this useful
THE EFFECT OF ADVERTISEMENT ON CONSUMER BRAND PREFERENCE
60,259 people found this useful
THE EFFECT OF SOCIAL MEDIA ON STUDENTS PERFORMANCE IN LEARNING LISTENING COMPREHENSION
59,885 people found this useful