ProjectClue.com We're Ready, Call Us

(+234) 07030248044

Project Topic:

REPAIR OF AN AIRCONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT

Project Information:

 Format: MS WORD ::   Chapters: 1 - 5  ::   Pages: 35 ::   Attributes: Table Of Content  ::   236 people found this useful

Project Department:

MECHANICAL ENGINEERING UNDERGRADUATE PROJECT TOPICS, RESEARCH WORKS AND MATERIALS

Project Body:

CHAPTER ONE

AIR CONDITIONER

Indoor climate, once adjusted to human need only by opening of heating in winter and by opening windows or using fans.  In summer, is now capable of being varied to meet almost any comfort of industrial demand, anywhere on earth with precise automatic control.

With the introduction of air conditioner, the indoor air can be controlled through the blowing and sucking surrounding.  Thus because of its comfort to man, need for air conditioning, Engineers, contractors, manufacturers and Technicians rising on a daily basis.

Now, consider for a moment the consequences which would result up all air conditioning systems were to stop.  Not only would the temperature and humidity condition become into levable, but industrial production would be adversely affected and activities involving computers, electronics, air craft, precision manufacturing, nuclear power, optics and synthetics, in fact most areas of modern progress would come to a hault.

Today in business, industry, schools, hospitals, hotels, theatres and homes, air conditioner is no longer luxury but an essential part of modern living.

DEVELOPMENT OF AN AIR CONDITIONING INDUSTRY

The development of air conditioning industry is an interesting story, illustrating well necessity for close working relationship among scientific, engineering, productions and its beginning with mechanical refrigeration.  In the late 1900s.  but it was not until 1917, when Nillis, H carrier began to meet the challenges of designing suitable experiment.  During the 1930s, the production of air-conditioning began and by firm scientific, engineering and production basis out with a limited market for its products.

THE AIM AND THE OBJECTIVE OF THIS PROJECT

The aim of choosing this project, is to put in order the damaged air conditioner in proper shape and better condition for effective usage.

To give wide knowledge of an air conditioner, types of operation and uses to the project group (student participating in the project).

Also to show the need to repair than to rep0lace to or to purchase a new system.

It also serves as a reference to other students that are to do a similar project.

PRINCIPLE OF AIR CONDITIONER AREVERSED CARNOT CYCLE PRINCIPLE (REFRIGERATION CYCLE).

The air conditioner is related to the refrigeration, hence, both use the same principle of the reversed carnot cycle.

It is called the reversed carnot cycle because it operates in the opposite direction.  In the carnot cycle, heat is received by the  working fluid at a high temperature and rejected at a low temperature.  Both processes are isothermal and also two isentropic processes.  In this case, a net amount of positive work is done by the working fluid.  this is the working of heat engines or heat pump or carnot cycle, positive work is done.

But cycles can be formed in which the reversed happens.  In this case heat is added or received at a low temperature and rejected at a high temperature.  By so doing, a net amount of negative work is done on the fluid.  this for any refrigeration cycle, the process is made to remove heat from a space or substance to reduce its temperature and transferring that to another space or substance.

 

 

 

 

Get the complete project »

Instant Share On Social Media:

OTHER SIMILAR MECHANICAL ENGINEERING PROJECTS AND MATERIALS

DETERMINATION OF STRATEGIES FOR ADEQUATE MAINTENANCE OF WORKSHOPS FOR EFFECTIVE INSTRUCTIONAL DELIVERY (A CASE STUDY OF NNAMDI AZIKIWE UNIVERSITY AWKA ANAMBRA STATE)

 Format: MS WORD ::   Chapters: 1 - 5 ::   Pages: 78 ::   Attributes: Questionnaire, Data Analysis, Abstract  ::   738 engagements

CHAPTER ONE INTRODUCTION BACKGROUND OF THE STUDY The primary purpose of the teaching and learning process is to bring about in the learner desirable change in behaviour through critical thinking an...Continue reading »

DESIGN AND FABRICATION OF A METAL BOOKSHELF

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 12 ::   Attributes: Questionnaire, Data Analysis  ::   515 engagements

ABSTRACT Knowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive. This is called for presentation of bo...Continue reading »

DESIGN AND FABRICATION OF A METAL BOOKSHELF

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 12 ::   Attributes: Abstract, Data Analysis

ABSTRACT Knowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive. This is called for presentation of bo...Continue reading »

THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE

 Format: MS WORD ::   Chapters: 1 - 5 ::   Pages: 20 ::   Attributes: Abstract  ::   423 engagements

CHAPTER ONE INTRODUCTION Candle molding machine is universally used for molding candlestick, which supplement light during darkness. Since man is endowed with the gift of sight and to make use of it...Continue reading »

REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION

 Format: MS WORD ::   Chapters: 1 - 5 ::   Pages: 31 ::   Attributes: Abstract  ::   399 engagements

ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air-conditioner is inevitable. Many homes and offices uses the air-conditioner to cool he...Continue reading »

REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING

 Format: MS WORD ::   Chapters: 1 - 5 ::   Pages: N/A ::   Attributes: Abstract  ::   368 engagements

ABSTRACT Mechanical Engineering Department of the Institute of Management and Technology has many non – functional machines. This is caused as a result of poor maintenance culture, which in tur...Continue reading »

What are looking for today?

WHAT OUR CUSTOMERS ARE SAYING:
  • 1. Nkem K from Kwame Nkrumah University, Ghana said "Very impressive project work i got and they also delivered on time. Keep up ur integrity and transparency".
    Rating: Very Good
  • 2. Ibraheem Hauzbro from From university of Maiduguri said "Have nothing To say that thanks give to Allah ".
    Rating: Very Good
  • 3. SHEHU DAUDA from AHMADU BELLO UNIVERSITY ZARIA A.B.U said "i applauded project clue for their excellent performance for satisfying student from various Universties on project work.".
    Rating: Very Good
  • 4. Ibrahim from BUK said "very nice".
    Rating: Excellent
  • 5. Vitar from University of Port Harcourt said "I had a wonderful experience using ProjectClue, they delivered not only on time, but the content had good qualty. I recommend ProjectClue for any project research work.".
    Rating: Very Good
  • 6. Faraz Hussain from University of Abuja said "This is a great help for those who seek education. May our Lord Almighty ALLAH bless you projectclue.com who brought this wonderful page and may he bless us (education seekers) too.".
    Rating: Excellent

Leave a comment: