Project Topic:

THE CONSTRUCTION OF ELECTRONIC DISPLAY BOARD

Project Information:

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 38 ::   Attributes: N/A  ::   13,169 people found this useful

Project Department:

ELECTRICAL ENGINEERING UNDERGRADUATE PROJECT TOPICS, RESEARCH WORKS AND MATERIALS

Project Body:

CHAPTER ONE

1.0    INTRODUCTION

The purpose of this project is to produce a narrative description of the design and construction of an electronic display board. Firstly computer aided design is the modelling of physical system on computer allowing both interactive and automatics analysis of design variant and the expression of design in a form of suitable for manufacturing. This follows by explaining the electronics display board as a device which is fast gaining wide acceptance and application in the present days due to its ability to provide a very high precision timing. This can be describe as an electro-mechanical system for processing information in which the information is represented by physical quantities, which are so constrained to take only discrete valuesthan can be referred to as binary signals.

In this design, we are implored the used of both hardware and software to bring about the entire project. The hardware components are solely coordinated by the AT 89551 electronics display chip while the C-programming language is used to program the chip.

1.1    OBJECTIVES OF THE PROJECT

Depending on one’s intension, electronics display board system has many aims and objectives. For instance, this one in particularly aims at displaying a moveable coded letter that says “WELCOME TO SCHOOL OF ENGINEERING” also electronic display board system can be used to control the traffic minder standing among motorist especially in junctions, moreover, electronic scoreboard during football matches to used display when a goal is scored, also to display the name of that played who scored the goal, above all, this system has contributed a lot in boosting advertisement.

1.2    PREAMBLES

Electronics display board system, is a system electronically designed and constructed, that is used to display different information to the view of the masses. The information to be displayed could be diagrams, symbols letters, colours, numbers, codes etc depending on what is needed at a particular places and time. This without doubt, has made life easier for the people in different ways, however electronics display board, which is the heart of this system, can be described thus: an electronic display is a computer. All computers whether we are talking personal desktop computer you are using is a general-purpose computer than can run any of thousands of programs. Electronic n-display are special purpose computer Electronics display do one thing well, there are a number of other common characteristics, that defined electronic display if a computer matches a majority of these characteristics, then you can call it an electronics display.

  1. Electronics displays are embedded inside some other devices (often a consumer product) so that they can control the features or action of the product. Another name for an electronics display, therefore, is embedded display.
  2. Electronic display are dedicated to one task and run one specific program. The program is store in Read Only Memory (ROM) and generally does not change. Electronics displays are often low power devices. A desktop computer is almost always plugged into a well sucked and might consume 50watt of electricity. A battery operated electronics display might consume 50mw.
  3. An electronics display has a dedicated input device and often (but not always) has a small LED or LED display for output. An electronics display also take from the devices it is controlling and control the device, mean while the use of an electronics display board to implement an electronics display system design made up of LED connected in common cathode matrix form is referred to as electronic display board programmable DOT matrix information display system.  This project design is a welcome compliment that “SCHOOL OF ENGINEERING”

1.3    JUSTIFICATION OF THE PROJECT

Due to the various problems encountered in the manual/analyze design and construction of sign post for advertisement, there is every need for an automated electronics display system that will solve this problem. This will ensure that viewers get the adequate information that is displayed in good and attractive colours. Though the manual/analog way of displaying information to the view of the people is still targeted viewer are attracted. The height is which advertisement in Nigeria have attained will be maintained if some of its design/construction operation is computerized (electronics display board) especially the ones that has to do with bigger companies. This will also maintain the good relationship between the company and its numerous customers.

1.5    SCOPE OF THE PROJECT

This project can serve in any aspect of life; this project (electronics display board) is a board on a computer aided design. In the implementation of this project. The scope that shall concentrate more on are: the architecture of the electronics display port interface, multiplexing the data port control sequence and algorithm of the traffic light. The features of the AT89551 were exploited to achieve the desired sequence of operation of this project.

1.6    CONSTRAINTS OF THE PROJECT

One of the obvious constraints I had in the course of this project was the security of sometime outright. Unavailability of some of the required components in the markets. Since scarcity is followed by a high in price, when such components were even found, they were out lightly expensive. Another major constraint I had relatively short time too sources out the materials from net, libraries, etc. fully understand the underlying principles and come up with a design that would work as a result, I had to forgo pleasure and even leiture in order to achieve this.

Get the complete project »


Instant Share On Social Media:


Can't find what you are looking for?
Call (+234) 07030248044.

OTHER SIMILAR ELECTRICAL ENGINEERING PROJECTS AND MATERIALS

CONSTRUCTION OF A LIGHT SENSITIVE ALARM

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 37 ::   Attributes: Abstract  ::   7582 engagements

CHAPTER ONE INTRODUCTION The light sensitive alarm is an electronic circuit that detects a sudden shadow falling on the light sensor and sounds the bleeper. When this happens, the circuit will respo...Continue reading »

SOLAR POWER INVERTERS, ANALYSIS AND TEST EVALUATION

 Format: MS WORD ::   Chapters: 1 - 5 ::   Pages: 96 ::   Attributes: N/A  ::   6178 engagements

CHAPTER ONE INTRODUCTION The quest to satisfy our need for stable power supply in Nigeria has driven most Nigerians into an ardent search for alternative renewable power sources. One of such major re...Continue reading »

The Design and Construction of a Microcontroller Based Dot Matrix Advert Display

 Format: MS WORD ::   Chapters: 1 - 5 ::   Pages: 47 ::   Attributes: Abstract  ::   3294 engagements

CHAPTER ONE INTRODUCTION The purpose of this project is to produce a narrative description of the design and construction of a microcontroller based dot matrix advert display. Firstly computer aided...Continue reading »

INVESTIGATION OF THE PERFORMANCE INDEX OF 3.5KVA/48V POWER INVERTER

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 63 ::   Attributes: Abstract  ::   3771 engagements

ABSTRACT The initial cost of the power inverter system is significant higher compared to the conventional source of power. As a result, there is need for the performance evaluation of various power i...Continue reading »

DESIGN OF AN AUTOMATIC BATTERY CHARGER

 Format: MS WORD ::   Chapters: N/A ::   Pages: 38 ::   Attributes: Questionnaire, Data Analysis  ::   6108 engagements

CHAPTER ONE Introduction While most modern electrical appliances receive their power directly from the utility grid, a growing number of everyday devices require electrical power from batteries in o...Continue reading »

DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 41 ::   Attributes: Abstract, Table Of Content  ::   3159 engagements

ABSTRACT The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted ...Continue reading »

What are looking for today?

WHAT OUR CUSTOMERS ARE SAYING:
  • 1. Haruna Usman Lame from Abubakar Tafawa Balewa University Bauchi said "I really enjoyed using this website am so grateful ".
    Rating: Excellent
  • 2. Bagu Manjing Dakan from polytecnic barkin ladi said "the use of information and communication technology in teaching of vocational subjects in plateau state polytecnic ".
    Rating: Excellent
  • 3. Ekeh Miracle from kaduna state University said "Toopnotch delivery from this crew I highly recommend everyyone to patronise them".
    Rating: Very Good
  • 4. Joseph from feck said "Bravo".
    Rating: Excellent
  • 5. JACOB from NASARAWA STATE UNIVERSITY, KEFFI said "I had a wonderful experience using ProjectClue, they delivered not only on time, but the content had good qualty. I recommend ProjectClue for any project research work.".
    Rating: Excellent
  • 6. Ibhadam Adam H from Bayero University, Kano said "Projectclue are really good and I have enjoyed their services.".
    Rating: Very Good